|
Michell Instruments
Manufacturers of dew point transmitters, chilled mirror hygrometers, relative humidity sensors, process moisture analyzers, hydrocarbon dew point analyzers, moisture in hydrocarbon liquid analyzers and oxygen analyzers, Michell Instruments is an international leader in high-precision sensing with over 30 years\' experience in the field.
Process Solutions is proud to provide the Michell product line to the State of Texas, including the Houston, Austin, Dallas, and San Antonio Texas areas. Contact Process Solutions at 281-491-3833 for more information about the Michell product lines. 
» » Michell Instruments
Category: Dew Point Transmitters
Michell offers a wide range of sensors capable of measuring moisture, humidity and dew point in a wide range of applications and industries. Michell’s sensors are developed using advanced ceramic moisture sensor technology. The principle of operation is quite simple. Operation of the sensor depends upon the absorption of water vapor into a porous non-conducting space between two layers built on top of a base ceramic substrate. The result of this means that the sensor responds very rapidly to change in applied moisture, both when being dried and when called into action if there is moisture ingress into a process. For further information, please refer to the Technology section.
Cermet II - Reliable On-Line Dew-Point Measurement
 Cermet II is the intelligent choice for reliable on-line measurement of moisture in virtually any gas, across many applications. Cermet II combines Michell's Advanced Ceramic Moisture Sensor and a monitor unit that can be located up to 4000 feet apart. While Cermet II is so simple to use, it has the flexibility to be applied to almost any humidity measurement application. The instrument can display measurement units in °F or °C dew point, ppmV, Lb/MMscf or g/m³ across the measurement range -150 to +70°F dp at pressures up to 5000 p.s.i.g. The Cermet II also can accept a pressure signal from a pressure transmitter (optional) providing the means of active pressure compensation for concentration units of measure. Product Features
Applications and Other Documents 
Compressed Air Systems2...
pdf/michell/compressed_ai...
Michell - Monitoring Pipe...
pdf/michell/MW4PipelineDr...
Ozone Generators...
pdf/michell/Ozone_Generat...
Easidew Sampler
 The Easidew Sampler is a general purpose sampling system that allows easy measurement of the dew point in many compressed air and industrial gas applications. The Easidew Sampler provides all the necessary components to allow a sample of gas under test to be conditioned for measurement either at atmospheric or full line pressure; the two most commonly demanded sampling conditions. Easidew Sampler provides flow and pressure regulation and an in-line particulate filter, as well as housing the sensor, all in a single monolithic block assembly. The system is provided with a multi-directional mounting bracket for easy mounting on a panel, post or pipe brace. Product Features
Applications and Other Documents
Automotive ...
pdf/michell/automotive_1....
CNG Filling Stations...
pdf/michell/cng_filling_s...
Michell - Monitoring Pipe...
pdf/michell/MW4PipelineDr...
|
|
|||||||||||||||||||
